BFFSD - EC-1022,SCOTCHGRIP INDUSTRIAL ADHESIVE
- MSDS: BFFSD
- Manufacturer: 3M COMPANY
- Product Name: EC-1022,SCOTCHGRIP INDUSTRIAL ADHESIVE
- National Stock Number: 8040-00-576-2014
Product Identification
Product ID:EC-1022,SCOTCHGRIP INDUSTRIAL ADHESIVE
MSDS Date:01/01/1987
FSC:8040
NIIN:00-576-2014
MSDS Number: BFFSD
Responsible Party
ST. PAUL, MN 55144-1000
US
Emergency Phone: 612-733-1341
Info Phone: 612-733-1341
Cage: 76381
Contractor
Telephone: 866-556 5712 / 612-733-1110
Cage: 76381
Ingredients
ACETONE (SARA III)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: <50%.
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: <15%.
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: <15%.
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:LIQ. MAY BE IRRITATING TO THE EYESE&SKIN.INHAL
OF CONCENTRATED VAPORS MAY CAUSE NARCOSIS.
First Aid
First Aid:EYE CONTACT.FLUSH IMMEDIATELY W/PLENTY OF WATER.CALL A
PHYSICIAN.SKIN CONTACT:WASH W/SOAP&WATER.INHALATION:PROVIDE FRESH
AIR.
Fire Fighting
Flash Point:0 F CC (ACETONE)
Lower Limits:1.0
Upper Limits:13.0
Extinguishing Media:CO*2,FOAM,DRY CHEMICALS.
Accidental Release
Spill Release Procedures:EXTINGUISH ALL IGNITION SOURCES.COLLECT
SPILLED MATERIAL AND PLACE IN CLOSED METAL CONTAINER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS,AND
FLAMES.USE ONLY IN AREAS W/ADEQUATE VENTILATION TO KEEP VAPOR LEVEL
BELOW TLV OF SOLVENTS.KEEP CONTAINER CLOSED.
Other Precautions:AVOID EYE CONTACT.AVOID PROLONGED BREATHING OF VAPORS
AND PROLONGED OR REPEATED SKIN CONTACT.KEEP CONTAINER CLOSED.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORY PROTECTION
IF VENTLTN INADEQUATE
Ventilation:LOCAL EXHAUSE RECOMMENDED
Protective Gloves:RUBBER GLOVES
Eye Protection:CHEMICAL GOGGLES
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:132 F
Vapor Pres:180
Vapor Density:2.0
Spec Gravity:0.88
Evaporation Rate & Reference:1.9,ETHER
Solubility in Water:SLIGHT
Appearance and Odor:LOW VISCOSITY BROWN LIQ,STRONG KETONE ODOR
Percent Volatiles by Volume:75.0
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO,CO*2&N DECOMPOSITION PRODUCTS
Disposal
Waste Disposal Methods:INCINERATOR-PROPERLY IN ACCORD W/LOCAL
REGULATIONS.DO NOT LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.